Why You Should Have A Double Bus Bar Panel

Busbar Panel is an effective busbar enclosure solution, it is a flexible and cost saving busbar enclosure and an efficient electrical busbar enclosure. Double Busbar Panels is having two independent busbars, separately for each alternate power supply such as captive power or state power. Generally in double busbar set up each circuit is attached to both the busbars. In some instances half of the installed busbar load is run and operated on one busbar, in such case bus or circuit break failure would lead to loss in half of the installed busbar. Such busbar breaks are also available with earth bus bar that is very effective and saves more energy than any other normal busbar breaker.


Any busbar break that is placed over the open connection of a grounded circuit needs to be properly closed. To do this, one needs to close both the terminals of each busbar. This is done by depressing and pulling the terminals firmly, while simultaneously pressing the center contact of busbar with a firm pressure. The next step is to check whether the busbar is already seated into its secure position. If not then pull the terminals firmly and depress the center contact firmly with the hammer. Once both the bus bars are in their proper position then you need to reattach the grounded conductor to the switchboard.


For busbar panel mounting it is necessary to find a sturdy mounting structure such as bus barn or a mast. If you have any thoughts with regards to the place and how to use web site, you can get in touch with us at the webpage. It is important to make sure that the mounting structure is fixed securely to the ceiling and does not move while any heavy loads are being carried. Also important is the insulation provided to the busbars. The insulation should be sufficient to provide the full protection and reduce the heat formation inside the lumbar panel. Moreover you can also consider using fiberglass busbars which are more effective than aluminum busbars.


Any busbar should have two power sources. These sources should be separate so that each power source is under control. For instance, if a circuit is tripped due to a lost power source then automatically the circuit breaker will be tripped too. If both sources of power are set in the busbar then an accident can happen. Thus a separate power source is very important. Also if one source of power is tripped then it can be restored by switching on and off the respective circuits with the help of switchboard relays.


Another major benefit of double busbar panel is that the overall safety of a building is enhanced due to the extra layer of protection. In case of any heavy load or any earthquake or flood then busbars provide tremendous protection. Also, these busbars are very easy to install and remove making them the preferred choice of industries and construction sites.


Bus bars are available in different widths and sizes. So, before buying a busbar it is necessary to know its actual size and it's place in the building so that the circuit breaker can be arranged properly. It's better to buy the circuit breakers from the same manufacturer because the quality is not compromised. Most of these busbar manufacturers also offer a guarantee on their busbar products.